JNP10K-PWR-DC2 Power Supply
The JNP10K-PWR-DC2 power supply provides two power supplies in a single housing that accepts
either 60 A or 80 A using four redundant input power feeds. The two internal power supplies (PS_0 and
PS_1) each have redundant input feeds: A0 and/or B0 for PS_0 and A1 and/or B1 for PS_1. You
configure the input using a set of three DIP switches on the power supply faceplate that sets the
combined output power for both internal power supplies. The output depends on the settings of these
DIP switches. See
Table 18: DIP Switch Settings for JNP10K-PWR-DC2 Power Supplies
INP0
(Switch 1)
INP1
(Switch 2)
H/L
(High Input 80 A/
Low Input 60 A)
Output Power
On
On
On (80 A)
5500 W
On
On
Off (60 A)
4400 W
On
Off
On (80 A)
2750 W
Off
On
On (80 A)
2750 W
On
Off
Off (60 A)
2200 W
50
