Connecting the Power
NetScreen-200 Series
11
There are two ways to rack-mount the NetScreen-200 Series:
•
Front mount
•
Mid-mount
)URQW0RXQW
To front mount the NetScreen-200 Series device on your equipment rack:
1.
Screw the front mount bracket to the side of the chassis.
2.
Screw the front mount bracket to the rack, as shown below.
0LG0RXQW
To mid-mount the NetScreen-200 Series device on your equipment rack:
1.
Screw the mid-mount bracket to the side of the chassis.
2.
Screw the mid-mount bracket to the rack, as shown below.
&
211(&7,1*
7+(
3
2:(5
To connect the power supply to the NetScreen-200 Series device:
1.
Plug the female end of a power cable into the male power receptacles on the back
of the system.
2.
Turn the Power switch ON.
