NetScreen-5000 Modules
17
Overview
Figure 7: 5000-2XGE Secure Port Module (5000-2XGE-G4 Similar)
Table 6 shows the transceivers that are available with the 5000-2XGE SPM.
5000-2G24FE SPM
The 5000-2G24FE SPM provides two 1-Gigabit Ethernet SFP sockets and 24 Fast
Ethernet (FE) ports with up to 2 Gbps of firewall and up to 1 Gbps of VPN process
capacity. This module supports a total of six aggregate interfaces. This total consists
of one aggregate interface for the two 1-Gigabit SFP Sockets, and five aggregate
interfaces for the 24 10/100 Ethernet ports. Only similar ports can be aggregated
together. For example, you cannot aggregate a Gigabit SFP port to a 10/100 FE port.
The 5000-2G24FE SPM is only supported by the 5000-M and 5000-M2
management modules. Also, you cannot mix this SPM with the 5000-8G2 or
5000-2XGE SPMs.
The 5000-2G24FE provides port Link and Activity LEDs, in addition to Power and
Status LEDs.
SFP transceivers are hot-swappable. For details on inserting or removing SFP
transceivers and connecting or disconnecting Gigabit Ethernet cables, see
“Servicing the Device” on page 45.
Figure 8: 5000-2G24FE Secure Port Module
Power LED
Status LED
Transmit/Receive LED
Link LED
Two 10-Gigabit XFP
Sockets
Table 6: Available Transceivers for NetScreen-5000-2XGE SPM
Part Number
Description
Distance
Fiber Type
NS-SYS-GBIC-MXSR
Transceiver, 300m 10 G, XFP
Short Reach
Multi-Mode Fiber
NS-SYS-GBIC-MXLR
Transceiver, 10km 10 G, XFP
Long Reach
Single-Mode Fiber
Status
LED
Two 1-Gigabit
SFP Sockets
Transmit/Receive LED
Power LED
Ethernet RJ-45 Ports
Link LED
