Module Port Descriptions
61
Appendix B
Port Descriptions and LED Status
This appendix provides detail on port descriptions and LED status for the
NetScreen-5000 Series modules.
“Module Port Descriptions” on page 61
“Module LED Descriptions” on page 62
“Status LED States” on page 62
“Power Supply LEDs” on page 64
“Fan LED” on page 65
Module Port Descriptions
Table 15 details the ports on the 5000-M, 5000-M2, and 5000-MGT3 management
modules.
Table 15: NetScreen-5000 Series Management Module Ports
Port
Description
Type
Speed/Protocol
Console
Enables a serial connection, to establish terminal sessions with the system. Used for
launching CLI sessions.
RJ-45
9600 Bps/
RS-232
Modem
Enables a serial modem connection for establishing dial-up sessions.
RJ-45
9600 Bps/
RS-232
MGT
Enables a connection for establishing out-of-band management sessions from outside
of the network.
RJ-45
10/100 Mbps/
Ethernet
HA1
Enables connection with another device in a redundancy cluster, where one device
serves as the master (primary) device, and the other serves as the backup (secondary)
device.
SFP
1 Gbps/
Gigabit Ethernet
HA2
Enables connection with another device in a redundancy cluster, where one device
serves as the master (primary) device, and the other serves as the backup (secondary)
device.
SFP
1 Gbps/
Gigabit Ethernet
