![background image](http://html1.mh-extra.com/html/juniper/ptx10001-36mr/ptx10001-36mr_hardware-manual_2032720101.webp)
shows the location of the DC input current selector (sometimes called the
DIP switch).
Figure 32: PTX10001-36MR DC Power Supply
1
—
Ejector lever
4
—
Handle
2
—
Status LED
5
—
Terminal block cover
3
—
DC input current selector (DIP switch)
4.
Open the cable manager latch on the terminal block cover of a power supply.
5.
Use a Phillips screwdriver to loosen the screw holding the cable manager latch to the power supply
terminal block cover. See
Figure 33: Loosen the Cable Manager Latch
6.
Remove the cable manager bracket to expose the four terminal studs.
92