![background image](http://html1.mh-extra.com/html/juniper/ptx10001-36mr/ptx10001-36mr_hardware-manual_2032720019.webp)
• The QDD-400G-ZR transceiver can be installed in the top 12 QSFP56-DD ports and 10
bottom QSFP56-DD ports.
• The QDD-400G-ZR-M transceiver can be installed in the top 12 QSFP56-DD ports and 6
bottom (in separate 1x2 cages) QSFP56-DD ports.
• We Recommend that you install the top ports with QDD-400G-ZR or QDD-400G-ZR-M
transceivers before installing the bottom ports.
• Temperature derating due to altitude does not occur.
describes the maximum number of ports for each interface type supported by the
QSFP56-DD ports.
Table 2: QSFP56-DD Ports: Maximum Supported Ports at Each Interface Speed
Interface Type
Maximum Supported Ports
NOTE: To achieve maximum ports, break out cables maybe required.
400GbE
24
100GbE
96
40GbE
24
25GbE
192
10GbE
96
NOTE: Port speeds are configured using the
set interfaces
interface-name speed speed
command.
You configure ports to operate at a particular speed by using the appropriate speed option. If you
configure a port to operate at a certain speed, and you want to return the port to the default
configuration, delete the
speed
statement from the configuration at the
[interfaces
interface-name]
hierarchy level and commit the configuration. The network port is reset to the default Ethernet
interface.
10