![background image](http://html1.mh-extra.com/html/juniper/ptx10001-36mr/ptx10001-36mr_hardware-manual_2032720081.webp)
provides the pinout information of the RJ-45 management port connector. An
RJ-45 cable is supplied with the PTX10001-36MR.
Table 33: RJ-45 Management Port Connector Pinouts for the PTX10001-36MR
Pin
Signal
Description
1
TRP1+
Transmit/receive data pair 1
2
TRP1–
Transmit/receive data pair 1
3
TRP2+
Transmit/receive data pair 2
4
TRP3+
Transmit/receive data pair 3
5
TRP3–
Transmit/receive data pair 3
6
TRP2–
Transmit/receive data pair 2
7
TRP4+
Transmit/receive data pair 4
8
TRP4–
Transmit/receive data pair 4
Console and ToD Port Connector Pinouts for the PTX10001-36MR
The console port (labeled CON\ToD) is an RS-232 serial interface that uses an RJ-45 connector to
connect to a console management device. The default baud rate for the console port is 9600 baud.
provides the pinout information for the RJ-45 console connector. An RJ-45 cable
and an RJ-45 to DB-9 adapter are supplied with the PTX10001-36MR.
NOTE: If your laptop or PC does not have a DB-9 plug connector pin and you want to connect
your laptop or PC directly to a PTX10001-36MR, use a combination of the RJ-45 cable and
72