root@#
set system services telnet
NOTE:
When Telnet is enabled, you cannot log in to the QFX5130-32CD through Telnet using root credentials.
Root login is allowed only for SSH access.
13. Enable SSH service.
[edit]
root@#
set system services ssh
14. To allow users to log in to the switch as root through SSH, include the root-login statement.
[edit system services ssh]
root@#
root-login (allow | deny | deny-password)
NOTE:
By default, users are not allowed to log in to the switch as root through SSH.
15. Commit the configuration. Your changes become the active configuration for the switch.
[edit]
root@#
commit
Step 3: Keep Going
IN THIS SECTION
Congratulations! Your QFX5130 is configured and ready to go. Here are some things you can do next.
9
