■
Phillips screwdrivers, numbers 1 and 2
■
Electrostatic discharge (ESD) wrist strap
Step 2: Install the Mounting Hardware
The specific mounting hardware required depends on the type of rack being used.
Use the appropriate procedure steps to install the mounting hardware for your
situation.
To install the mounting hardware:
1.
Locate the rack mount brackets in the accessory kit.
2.
Use the screws provided to secure the rack mount brackets to the sides of the
chassis:
■
For a two-post rack, mount the brackets at the mid-mount holes as shown
in Figure 3 on page 6.
■
For a four-post rack, mount the brackets near the front edge of the chassis
as shown in Figure 4 on page 6.
Figure 3: Attaching Mounting Hardware for Two-Post Rack
g030257
Figure 4: Attaching Mounting Hardware for Cabinet or Four-Post Rack
g036007
6
■
Step 2: Install the Mounting Hardware
SRX 3400 Services Gateway Getting Started Guide