Figure 7: Installing the Device in a Two-Post Rack
g030258
Figure 8: Installing the Device in a Four-Post Rack
0
1234
g036095
Rear shelf
5.
Install the remaining screws in each mounting bracket.
6.
Move the lift away from the rack.
7.
Visually inspect the alignment of the device. If the device is installed properly in
the rack, all the mounting screws on one side of the rack should be aligned with
the mounting screws on the opposite side, and the device should be level.
Step 3: Install the Device
■
9
Step 3: Install the Device