CHAPTER 15
Maintaining Components
•
Maintaining the SRX110 Services Gateway Hardware Components on page 107
Maintaining the SRX110 Services Gateway Hardware Components
Table 44 on page 107
describes the common tasks to maintain the hardware components
of the services gateway.
Table 44: Maintenance Procedures for the Services Gateway Hardware
Components
Description
Maintenance
Procedure
To maintain optimum performance of the services gateway, you should
regularly perform the following preventive maintenance procedures:
•
Inspect the installation site for moisture, loose wires or cables, and
excessive dust.
•
Make sure that airflow is unobstructed around the device and into
the air intake vents.
Routine Maintenance
Procedures
To maintain the power supply on the services gateway:
•
Make sure that the power and grounding cables are arranged so that
they do not obstruct access to other device components.
•
Periodically inspect the site to ensure that the grounding and power
cables connected to the device are securely in place and that there
is no moisture accumulating near the device.
CAUTION:
We recommend using a surge protector for the power
connection.
Maintaining the Power
Supply
Related
Documentation
•
Connecting the SRX110 Services Gateway to the Power Supply on page 79
•
Clearance Requirements for Airflow and Hardware Maintenance of the SRX110 Services
Gateway on page 34
107
Copyright © 2015, Juniper Networks, Inc.
