•
Grounding the SRX5400 Services Gateway on page 180
•
Powering On an AC-Powered SRX5400 Services Gateway on page 191
•
Powering Off the SRX5400 Services Gateway on page 196
Powering On an AC-Powered SRX5400 Services Gateway
To power on an AC-powered services gateway:
1.
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
ESD points on the chassis.
2.
Verify that the power supplies are fully inserted in the chassis.
3.
Verify that each AC power cord is securely inserted into the appliance inlet.
4.
Verify that an external management device is connected to one of the Routing Engine
ports (
AUX
,
CONSOLE
, or
ETHERNET
).
5.
Turn on the power to the external management device.
6.
Switch on the dedicated customer site circuit breakers for the power supplies. Follow
the ESD and safety instructions for your site.
7.
Move the AC input switch on each power supply to the on (
|
) position and observe
the status LEDs on each power supply faceplate. If an AC power supply is correctly
installed and functioning normally, the
AC OK
and
DC OK
LEDs light steadily, and the
PS FAIL
LED is not lit.
If any of the status LEDs indicates that the power supply is not functioning normally,
repeat the installation and cabling procedures.
NOTE:
After powering off a power supply, wait at least 60 seconds before
turning it back on. After powering on a power supply, wait at least 60
seconds before turning it off.
If the system is completely powered off when you power on the power
supply, the Routing Engine boots as the power supply completes its startup
sequence. If the Routing Engine finishes booting and you need to power
off the system again, first issue the CLI
request system halt
command.
After a power supply is powered on, it can take up to 60 seconds for status
indicators—such as the status LEDs on the power supply and the
show chassis
command display—to indicate that the power supply is
functioning normally. Ignore error indicators that appear during the first
60 seconds.
8.
On the external management device connected to the Routing Engine, monitor the
startup process to verify that the system has booted properly.
191
Copyright © 2017, Juniper Networks, Inc.
Chapter 22: Providing Power to the SRX5400 Services Gateway
Summary of Contents for SRX5400
