Getting Started Guide
CONFIGURING THE DEVICE
Use the instructions below to start the Initial Configuration Wizard (ICW), which helps
you to configure the device to protect your network.
Step 1
Launch a browser. In the URL address field, enter
http://192.168.1.1
. The Rapid Deployment Wizard window
appears. (The default login admin name and password is
netscreen
.)
Note:
You can access the ICW from Ethernet ports 0/2 — 0/6,
which are bound to the Trust security zone.
Step 2
If your network uses Juniper Networks NetScreen-Security Manager,
you can use a Rapid Deployment configlet to automatically configure
the device. Obtain a configlet from your NetScreen-Security
Manager administrator, select the
Yes
option, select the
Load
Configlet from:
option, browse to the file location, then click
Next
.
The configlet sets up the device for you.
If you want to bypass the ICW and go directly to the WebUI, select
the last option, then click
Next
.
If you are not using a configlet to configure the device and want to
use the ICW, select the first option, then click
Next
. The Initial
Configuration Wizard welcome screen appears. Click
Next
.
To configure your device with the WebUI or ICW, refer to the
SSG 5 Hardware Installation and Configuration Guide
.
By default the ethernet0/2 — ethernet0/6 interfaces are bound to
the bridge group
bgroup0
and they all share the IP address
192.168.1.1/24
. You can connect the SSG 5 device to your trusted
network with any of the ports bound to this bgroup.
To change the interface bindings, refer to the
SSG 5 Hardware
Installation and Configuration Guide
.
The following table explains the default interface-to-zone bindings:
Label
Interface
Zone
Ethernet ports:
0/0
ethernet0/0 Untrust
0/1
ethernet0/1
DMZ
0/2
bgroup0 (ethernet0/2)
Trust
0/3
bgroup0 (ethernet0/3)
Trust
0/4
bgroup0 (ethernet0/4)
Trust
0/5
bgroup0 (ethernet0/5)
Trust
0/6
bgroup0 (ethernet0/6)
Trust
AUX
serial0
Null
WAN ports:
ISDN
serial0
Untrust
V.92
serial0
Untrust
SSG 5-WLAN: (On WLAN versions only)
wireless0/0 (default IP address is
192.168.2.1/24)
Trust
wireless0/1-0/3
Null
Copyright © 2006 Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, NetScreen, NetScreen Technologies, GigaScreen, NetScreen-Global PRO,
NetScreen-Remote, NetScreen ScreenOS and the NetScreen logo are trademarks and registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other
trademarks and registered trademarks are the property of their respective companies. Information in this document is subject to change without notice. No part of this document may
be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without receiving written permission from Juniper Networks, Inc.
P/N 530-015649-01Rev. A
