1. Touch temperature regulator button
(7).
Current temperature indicator blinks.
2. Any time you touch the temperature
regulator button (7), the setting moves
by one position. When you select a
temperature, the LED corresponding to
selected temperature value blinks for a
while and the setting is fixed.
The set temperature will be
reached within 24 hours. After
a power failure the set
temperature remains stored.
FastFreeze function
The FastFreeze function is used to
perform pre-freezing and fast freezing in
sequence in the freezer compartment.
This function accelerates the freezing of
fresh food and, at the same time, protects
food products already stored in the freezer
compartment from undesirable warming.
To freeze fresh food activate
the FastFreeze function at least
24 hours before placing the
food to complete pre-freezing.
To activate FastFreeze function press the
FastFreeze button (7) for 3 seconds. The
FastFreeze indicator switches on.
This function stops
automatically after 52 hours.
It is possible to deactivate the function at
any time by pressing FastFreeze button
(7) for 3 seconds again. The FastFreeze
indicator switches off.
High temperature alarm
When there is a temperature increase in
the freezer compartment (for example due
to an earlier power failure), the freezer
compartment indicator flashes and the
sound is on.
To deactivate the sound press any button.
The freezer temperature indicator LED
continues to flash until the normal
conditions are restored.
If you do not press any button, the sound
switches off automatically after around
one hour to avoid disturbing.
Door open alarm
If the fridge door is left open for
approximately 5 minutes, the fridge
compartment indicator flashes and the
sound is on.
During the alarm the sound can be muted
by pressing any button. The sound
switches off automatically after around
one hour to avoid disturbing.
The alarm deactivates after closing the
door.
DAILY USE
Positioning door shelves
The door of this appliance is equipped
with runners that enable shelves/bins to
be arranged according to individual
preferences.
To reposition the door shelves/bins:
1. Gradually lift the shelf/bin in the
direction of the arrows until it comes
free.
2. Place the shelf/bin in desired position
and gently insert it into the runner.
1
1
2
9
