15
Fig. 10
Check the position
again by slackening
the screws and pins
then, once the best
position has been ob-
tained, fully tighten
all the fixings.
Cover the visible part
of the top bracket on
the panel with plastic
cover (D), inserting it
in the locations provided in the bracket.
Fig. 11
Once the door has
been correctly aligned,
tighten the holding
nuts on the fixing
brackets and attach
the appliance to the
adjacent units and
the bottom of the work
surface (Fig. 11).
Fig. 12
For a correct instal-
lation operation if the
base plate is more
than 100 mm (for cav-
ity height 820 mm) or
more than 150 mm (for
cavity height 870 mm)
y o u m u s t c u t o u t
the plate as shown in
Fig. 12.
D472
D
D517
450
D690
min.
50cm
2
