Fasten the appliance with 4 screws
provided in the kit included with the
appliance
From the plastic cover (E), which is
used to cover the hinge with the pivot
pin, you must take away the part as
indicated in the drawing.
This operation is made easer since
there is, in the internal part of the cover
hinge lid a groove that facilates the
removal of this coomponent.
“Remove the part marked with DX, if
the pivot pin is inserted in the right
hinge, SX in opposite case.”
D765
electrolux
39
Apply joint the sealing strip as shown
in figure.
Make sure that a distance of 44
mm is maintained in the lower part
between the kitchen furniture and the
border of the appliance.
The lower hinge cover inserted in
the accessories bag, is useful to
guarantee the exact position of the
kitchen furniture and the appliance.
Also make sure that the appliance
does not clamp the mains cable.
1
2
44m
m
I
I
