28
4 Permanent settings in programming mode
Example:
Proceed as follows to change the consistency of grind for
the grinder on the
right.
Precondition:
The start screen is displayed.
T
Press the Rotary Switch.
T
Touch the ‘Machine setting’ symbol.
‘Switch off after’
T
Turn the Rotary Switch until
‘Set consistency of grind’
is
displayed.
T
Press the Rotary Switch.
‘Mahlwerk links’
T
Touch
‘Save’
.
‘Mahlwerk rechts’
T
Turn the Rotary Switch to change the setting.
T
Touch
‘Save’
.
‘Saved’
appears briefly on the display.
‘Set consistency of grind’
T
Touch
‘Back’
the number of times needed to display the start
screen again.
By instructing your GIGA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your GIGA switches off automatically after the preset time following
the last action on the machine.
You can set the automatic switch-off to 15 minutes, 30 minutes or
1 – 9 hours.
Precondition:
The start screen is displayed.
T
Press the Rotary Switch.
T
Touch the ‘Machine setting’ symbol.
‘Switch off after’
T
Touch
‘Switch off after’
.
T
Now move your finger to the left or right to change the
switch-off time.
T
Touch
‘Save’
.
‘Saved’
appears briefly on the display.
‘Switch off after’
T
Touch
‘Back’
the number of times needed to display the start
screen again.
Automatic switch-off