D) Grinding and Brewing
• Push the
DIAL
. Display shows the cup size, e.g.
4.0 OZ.
• Turn the
DIAL
to change the cup size from
1.0
to
8.0 OZ.
• Coffee Strengths: Push the
1-CUP
button once:
MILD
,
twice
NORMAL
, three times
STRONG
.
• When pushing the
2-CUP
button, the machine will brew
twice as much coffee as set with the
1-CUP
button.
HOTTER COFFEE?
Pre-warm cup with hot water through
frother. See chapter F "Using Hot Water". Empty cup and
brew coffee.
E) Changing the Grinder Fineness
Important:
You can only adjust the fineness during the actual
grinding process.
• Open the bean container lid and turn the dial while grinding:
thicker bars: coarser grind; thinner bars: finer grind.
• For darker, oily beans – grind somewhat coarser.
For lighter beans – grind somewhat finer.
F) Using Hot Water
• Place a cup underneath the frother. Turn the
SELECTOR
to the water symbol,
e.g. 5 OZ.
• Turn the
DIAL
to select to desired amount of water.
WATER
.
SHUT TAP
. Turn the
SELECTOR
to the Coffee
Symbol. You can always stop the hot water flow before
the display shows
SHUT TAP
.
G) Using Steam (Frothing and Steaming)
Important:
Frother parts must be tightly connected and clean.
•
Cappuccino
: One shot espresso plus ~4 oz. of steamed
and frothed milk. Frother sleeve DOWN.
•
Latte
: One shot espresso plus ~4 to 5 oz. of steamed
milk. Frother sleeve UP: steaming only (no frothing).
1. Push the
STEAM
button.
HEATING
. After ~20 sec.:
STEAM READY
.
2. Immerse the frother into a pitcher with milk and turn the
SELECTOR
to the water symbol, e.g.
40 SEC.
Turn the
DIAL
to select to desired steaming time (3 to 120 sec).
STEAM
. Steam pushes into the milk.
3.
SHUT TAP
. Turn the
SELECTOR
to the Cup Symbol. You
can always stop the steam output with the
SELECTOR
.
4. Repeat process for additional steam.
5. After steaming you can immediately brew coffee.
Knocking Noise during Frothing:
The pumps dispenses
water droplets into the heating system.
Please note:
Skim and 1% milk will produce more froth
than 2% and regular milk.
HOTTER MILK?
After frothing the milk, use the steaming
position (Frother sleeve UP) to increase the milk temperature.
H) Cleaning the Frother
Within 10 min. after last use, place a cup under the frother.
Turn the
SELECTOR
for 5 sec. to the Hot Water symbol. For
thorough cleaning see page 15 of the Operating Instructions.
