27
4 Permanent settings in programming mode
T
Press the
‘ < ’
or
‘ > ’
button to change setting for the interval
to
‘40 sec.’
.
T
Press the
‘Save’
button.
‘Saved’
appears briefly on the display.
‘Latte macchiato’
O
T
Press the P button to exit programming mode.
‘Please select product:’
In the program item
‘Maintenance settings (3/6)’
you can make the
following settings:
U
‘Filter’
U
Activate the CLEARYL Blue filter cartridge (see Chapter 1 ‘Pre-
paring and using for the first time – Inserting and activating
the filter’).
U
‘Water hardness’
U
If you do not have a filter cartridge, you will need to set the
water hardness (see Chapter 1 ‘Preparing and using for the
first time – Adjusting the water hardness’).
U
‘Rinse the coffee system’
/
‘Manual’
U
The switch-on rinse must be started manually.
U
‘Rinse the coffee system’
/
‘Automatic’
U
The switch-on rinse is started automatically.
U
‘Rinse the milk system’
/
‘After 10 min.’
U
You are prompted to rinse the milk system 10 minutes after
preparation of a specialty coffee with milk.
U
‘Rinse the milk system’
/
‘Immediate’
U
You are prompted to rinse the milk system immediately
after preparation of a specialty coffee with milk.
Example:
Proceed as follows to make the machine prompt you to
rinse the milk system
immediately
after preparing a specialty coffee
with milk.
Precondition:
‘Please select product:’
is displayed.
O
T
Press the P button.
‘Maintenance status (1/6)’
g
T
Turn the Rotary Switch until the program item
‘Maintenance
settings (3/6)’
is displayed.
T
Press the
‘Rinse the milk system’
button.
‘Rinse the milk system’
Maintenance settings
Summary of Contents for IMPRESSA J9 One Touch
Page 49: ...49 intentionally blank ...
Page 50: ...50 intentionally blank ...
Page 51: ...51 intentionally blank ...
