13
Then press key
briefly to store mode in memory
You can call up the next setting by pressing key
.
You can programme your machine to “economy mode”. In
the setting ECONOMY MODE ON the steam heating-
system is switched off. The heating for the cup warming tray
is switched off too. If you want to draw off steam you need
to press the steam key
, warning lamps flash and your
machine heats up.
After 10 minutes the steam heating-system switches off
automatically. The warning lamps go out. By pressing the
steam key anew, you return to stand-by-status for drawing
off steam.
ECONOMY MODE OFF means that the stand-by-status for
steam is set to 10 minutes and the heating for the cup warm-
ing tray is on. After 10 minutes the heating-system switches
down to a stand-by temperature. By pressing the steam key
anew, the machine returns to stand-by-status for drawing off
steam.
12.7 Programming TIMER CLOCK
A programming of the timer clock is necessary if an automa-
tic switch on time is required.
TIME –.–
Press key
.
By briefly pressing key
or
you can set the hours and then
confirm by pressing key
.
By briefly pressing key
or
you can set the minutes and
then confirm by pressing key
.
You can call up the next setting by pressing key
.
+
P
-
+
P
-
+
P
+
P
When the required water quantity is reached press key
. You
can call up the next setting by pressing key
.
There is an additional possibility to alter the water quantity
anew. Press key
or
for this purpose.
If you wish to draw another coffee to control the water quantity,
press key again otherwise press key
briefly to store water
quantity in memory.
You can call up the next setting by pressing key
.
12.4 Programming FILTER
Please read chapter 7.1 “Placing filter”.
12.5 Programming WATER HARDNESS
(only with setting FILTER NO)
HARDNESS LEVEL 3
Press key
By pressing key
or
briefly you can programme the water
hardness level.
Then press key
briefly to store the water hardness level in
memory.
You can call up the next setting by pressing key
.
To determine the water hardness level please read chapter 6.
“Adjusting for water hardness”.
12.6 Programming ECONOMY MODE
ECONOMY MODE OFF
Press key
ECONOMY (MODE OFF flashes)
By briefly pressing key
or
you can programme the mode
you would like.
-
+
P
+
P
-
+
P
+
P
-
+
+
P
E
