background image

19

18. Messages

Cause

Action

FILL WATER

Water tank is empty

Top up with water

Water level indicator in tank is jammed

Empty tank, rinse out, fill up and replace

Tank is calcified, water level indicator is stuck

Remove tank, decalcify, rinse well, fill up with 
water and replace

FILL BEANS

Bean container is empty

Top up with beans

Message still displayed, although beans filled

Draw off cup of coffee. FILL BEANS message 
only disappears after coffee is drawn off

A foreign object is stuck in the grinder

Remove foreign object as described in chapter 
13.5 “Removing foreign objects”

EMPTY GROUNDS

Coffee grounds container is full

Remove drip tray, empty grounds container, 
replace tray

Message still displayed, although grounds 

The tray was out of the machine for less than 

container emptied.

8 sec for emptying. Take tray out again for 
approx. 10 sec and replace

The message appears after only a few cups 

Leave the machine switched on while 

have been drawn off

the grounds container is being emptied. The 
counter is only reset to zero if the machine is left
switched on

TRAY MISSING

Tray has not been replaced correctly

Insert tray correctly

Grounds have fallen under tray and are preventing 

Remove tray, clean inside 

it from being correctly inserted

of machine, replace tray

EMPTY TRAY

The residual water container is full

Remove container carefully, empty, rinse out 
and replace

Message still displayed, although container emptied

Remove container, clean metal contacts 
(please refer to chapter 13.8)

E

Summary of Contents for IMPRESSA S70























Reviews: