20
3 Familiarising yourself with the control options
Settings in programming mode always follow the same model.
Example
: Proceed as follows to change the amount of powder for
an espresso.
Precondition
: Your IMPRESSA is ready for operation.
T
Open the cover of the programming buttons.
O T
Press the P button
until
WATER HARDNESS 16° dH
appears.
T
Press the + or - button several times until PRODUCT
SETTINGS is shown.
O T
Press the P button to enter the programme item.
SELECT PRODUCT and the available products are dis-
played.
T
Press the 1 espresso button.
1 ESPRESSO / WATER AMOUNT 35 ML
T
Press the + button several times until 1 ESPRESSO / POWDER
AMOUNT is shown.
O T
Press the P button to enter the programme item.
1 ESPRESSO / POWDER AMOUNT
T
Press the + or - button several times to select the powder
amount.
O T
Press the P button to confirm the setting.
CONFIRMED appears briefly on the display.
1 ESPRESSO / POWDER AMOUNT
0 T
Press the exit button to exit the programming item.
SELECT PRODUCT
0 T
Press the exit button to exit the programming item.
PRODUCT SETTINGS
0 T
Press the exit button to exit programming mode.
Your IMPRESSA is once more ready for operation.
With the INFORMATION programme item you can view the follow-
ing information:
Z
Number of the prepared coffee and milk specialities and hot
water
Z
Maintenance status and number of maintenance programmes
performed (cleaning, descaling, filter change, milk system
cleaning)
Viewing information
and maintenance
status
Summary of Contents for IMPRESSA X9 Win
Page 41: ...41 6 Maintenance T Fill thewater tank with fresh cold water and reinsert...
Page 50: ...50...
Page 51: ...51...
