12
1 Preparing and using for the first time
E
If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
T
Turn the Rotary Switch to change the water hardness
setting, e.g. to
‘25 °dH’
.
T
Press the
‘Save’
button.
‘Saved’
appears briefly on the display.
‘Insert filter’
T
Place a receptacle under the dual spout.
T
Remove the water tank and rinse it with cold water.
T
Fit the filter cartridge extension supplied on top of a CLARIS
Smart filter cartridge .
T
Insert the filter cartridge with its extension into the water
tank.
T
Turn the filter cartridge clockwise until it audibly clicks into
place.
T
Fill the water tank with fresh, cold water and reinsert the
tank.
E
The machine automatically detects that you have just inserted
the filter cartridge.
‘Use filter’
/
‘Saved’
‘Filter is being rinsed’
, the filter is rinsed. The water flows
directly into the drip tray.
‘System is filling’
, water flows out of the dual and hot-water
spout.
‘Empty drip tray’
T
Empty the drip tray and put it back into the machine.
T
Place a receptacle under the dual spout.
‘Machine is heating’
‘Machine is rinsing’
, the system is rinsed. The rinse stops
automatically. The start screen is displayed. Your Z6 is ready
for use.
E
The display shows the products you can prepare.
Summary of Contents for Z6
Page 1: ...Z6 Instructions for Use PROFESSI O N A L A R O M A G R I N D E R ...
Page 50: ...50 ...
Page 51: ...51 ...
