JKF50 FRIDGE FREEZER
SWAPPING THE DOOR
OPENING SIDE
Remove the top panel on the fridge by
unscrewing the 3 screws on top of the
control panel.
Remove the handle
mechanism from the door,
there are two screws accessible
from the top to do this.
Remove the Blanker on the opposite side of the handle by removing
the 3 screws holding the blanker in place from underneath
Remove the two screws on the
hinge (right) side of the fridge.
Remove the two screws on the left
side of the fridge.
Remove the 2 screws on the
top hinge (right) side of the door.
Take a few minutes to take a look at the fittings on each side (top & bottom) plus the handle on the door.
Carefully put the fridge on it’s back (The fridge will need to be left upright for at least 6 hours before being switched on)
01.
02.
03.
05.
06.
04.
01.
02.
04.
05.
06.
03.
DOOR REMOVAL
