JKF50 FRIDGE FREEZER
SWAPPING THE DOOR
OPENING SIDE
Attach the hinge bracket with the
two screws to the left hand side of
the base of the fridge.
Attach the top hinge bracket ensuring
the locator pin is in the left hand hole
and then attach the screws at the top
of the bracket.
Now Refit the Top display panel by screwing the 3 top screws in and then
the hinge screw underneath.
Reattach the blanker to the left side beneath the
control panel using the 3 screws.
Attach the handle again to the right hand side
using the 2 screws.
Attach the non-hinge bracket with
the two screws to the right hand
side of the base of the fridge.
Return the fridge to the upright position and reattach the door at the base on the left using the locator pin.
01.
04.
05.
06.
07.
03.
02.
02.
01.
DOOR REPLACEMENT
