JKF50 FRIDGE FREEZER
FITTING GUIDE
01.
03.
Before fitting, line the unit up and dummy fit to the space
for the appliance. Remember to leave specified gaps to ensure
cold temperature efficiency.
Carefully unpack your JKF50 fridge and check the unit
for any damage.
For more helpful Fitting Guides
click here or visit justkampers.com/
Check that the fridge
door opens properly
when in position,
ensuring easy access
and that you can
remove the fridge/
freezer divider,
there is the option
to change which
side the door opens.
Tools needed for installation
• Philips Head Screwdriver
• Flat Head Screwdriver
• Heatshrink Connectors X2
• Crimping Tool
• Pliers
• Wire Cutters
• Tape Measure
• Wedges
• Drill (check your battery)
• Phillips head bit
for your drill
• Screws (depth depends
on your kitchen units) X4
• Something to protect
your floor
BEFORE INSTALLATION
02.
200mm
20
0
mm
10
0
mm
10
0
mm
During installation you might scratch the floor so ensure adequate protection is in place.
Ensure your JKF50 has been kept upright, on a level
surface for 6 hours prior to installation.
04.
