Page:8/14
CONTROL AND SETTING
This portable air conditioner of cooling only model has three functions: cooling, dehumidifying
and fan. If the machine you purchased is cool and heat model, it has four functions cooling,
heating, dehumidifying and fan
Fan has three speeds: high speed, middle speed and low speed,
Setting temperature is 18--30
0
C, 24 hours timer, water-throwing function, sensor and
water-level protective function.
1
、
Control instruction
：
Control panel
：
Display
Area
Fan
Speed
Timer
Mode
Sleeping
Swing
Max cool
On/Off
Up
Down
Signal
Receptor
1.1 When plug in, follow the start music, unit is in standby status. Digital screen will
indicate temperature(Range: 5
～
35
℃
/41
～
95
℉
),if ambient temperature above 35
℃
,screen will show “H”. If it is below 5
℃
, it will indicate “L” and the unit will enter
standby status.
1.2
ON/OFF
button: When press this button, model will enter cooling mode (Setting
temperature 24
℃
/75
℉
), high speed fan. Press again, unit will shut off and play shut-
off music.
1.3
Mode button
：
Press this key to choose Cooling, Heating (only for cool & heat model)Fan , or
Dehumidifying Mode.
1.4
Fan button
：
a) Under cooling mode:
HIGH FAN
（
）→
MIDDLE FAN
（
）→
LOW FAN
（
）→
HIGH FAN
（
）
→…，
goes like this.
b) Under fan model: same as cooling mode
c) Under dehumidifying mode, fan is working in low speed
d) If switch between cooling and fan, fan speed won’t change.
1.5
Timer button
：
Press it,
icon will flash, “88” areas indicates 24:00; you can set your time
through
and
buttons. The HOUR number will change from 1,2,3…24; the
Minute number will change from 10, 20,30…50.Auto-shut-off timer is only
