background image

                                                                                                                                   

Page:9/14                                                                                                                          

available when the unit on; auto-run timer is only available when the unit is off. 

After timer setting accomplishes effectively, 

  icon will keep on flashing until 

setting time is due. If set again, history record will be cleared. 

1.6  

Up

 and 

Down

 

button

  can set temperature and timer . 

Under cooling or heating mode, the sting temperature ranges from 18

30

/64

86

If press Up 

and Down 

button simultaneously, the unit will shift between 

 to 

1.7  

Sleeping key

:  

Under cooling or heating mode, press the key can make unit into sleeping mode, 

LCD will show

, press again to cancel. 

1.8  

Swing button

: press this key to start auto swing function, press again to cancel. 

1.9  

Max cool key 

 :Press this key to choose Max cool function: You can get cooling 

effect quickly only under cooling mode. 

2.  Remote control 

       

                                 Drawing of Remote Control panel

 

LOCK

RESET

LOCK

RESET

 

                         

Remote control for Cool only                    Remote control for Cool & Heat 

1.

Power

Press this key to turn on/off the button. 

2.

Mode

Press this key to choose cooling, heating, dehumidifying, fan 

3

.

Up

Press this key to turn up temperature or adjust time. 

4

.

Down

Press this key to turn down temperature or adjust time. 

Summary of Contents for AIRCO12000















Reviews: