Justin JED650, User Manual

In drum kit menu, user can set the parameters,
1.Press [SET UP] to enter drum kit parameter 

   setting interface. 

2.Select DRUM PAD SETTING to enter drum kit 

   parameter setting. 

3. Press [SET UP] again to enter pad parameter 
    setting interface. 
4. Use the pad button to select pad or strike the 
    relative pad.

Change pad voice 

1. Select the pad via pad button or strike 

the pad directly. 

2. Use the direction key       to select voice. 

(Note: refer to the voice list for voice)

19

Note: user can choose via hitting pad rim and 
the cymbal rim

6. After setting, press SAVE to save the user drum 

kits. User can change the drum kits via direction 
keys. After selection, press SAVE once again to 
save the change or press CANCEL to cancel the 
change. 

5. User can select the pad parameter and change 

   parameter via direction key (refer to the following: 

   change pad tone/change volume/change pan/change

    MIDI out pitch

DRUM PAD SETTING
PAD SENSITIVITY
RELOAD FAC SET

 EFFECT

VOICE=ESN_04
VOLUME=080
PAN=084
MIDE PITCH=046

SAVE CHANGE
FOR USER01
PRESS SAVE FOR YES
PRESS CANCEL FOR NO

Create your own drum kit            

Change pad volume  

1. Use the direction key        to select VOLUME
2. Use the direction key        to change volume. 

VOICE=ESN_04
VOLUME=080
PAN=084
MIDI PITCH=046

VOICE=ESN_04
VOLUME=080
PAN=084
MIDI PITCH=046

VOICE=ESN_04
VOLUME=080
PAN=084
 MIDI PITCH=046

Change pad pan of L/R channel  

1. Use the direction key         to select PAN
2. Use the direction key         to change the pan 
    of L/R channel. 
    (GM standard:000---127)

VOICE=ESN_04
VOLUME=080
PAN=084
 MIDI PITCH=046

Change MIDI output pitch

1.Use the direction key          to select 
   MIDI PITICH
2.Use the direction key          to change 
   MIDI output pitch value(000---127)
   (when adjusting parameters, press[SET UP]
   To reset all parameters to default status)

Making the setting for pads

1. Use the direction key        to switch to PAD SENSITIVITY
2. Press [SET UP] button to enter pad sensitivity setting interface.

The pad curve is relative to the pad dynamic signals. 

(Default:CURVE2)

Adjusting PAD CURVE 

DRUM PAD SETTING
PAD SENSITIVITY
RELOAD FAC SET
 EFFECT

PAD  HIHAT
PAD CURVE=2
THRSHLD=4
 CROSSTALK=2

20