Justin JED700M, Owner'S Manual

2.Connect the computer via MIDI port

MIDI IN: receiver MIDI signal of computer or other devices. 

MIDI OUT: send pad performance signal to external MIDI devices or computer. 

MIDI connector:

 If you're using an external MIDI keyboard or pads to control the digital drum, make 

connections as shown. Here, it is used as a sound module.

Connect with a MIDI keyboard

Make sure the power is switched OFF. Connect the power adaptor to the DC IN jack on the side panel. 

After confirming that all connections have been completed, rotate the volume knob to the left (minimum

 volume level) before switching the power on. Set the power switch to the 

“

ON

”

 position. The KIT 

indicator on LCD will light up and the display will show kit number 01 pop 01.

Note:

Make sure the power is switched OFF when connecting the drum module with external devices.

Power supply and switch

7

8

Basic operating

Select  a drum kit

After powering up, the digital drum will be in kit menu (kit indicator on ). the display should 

look like the following figure. there are 3 ways to activate the drum kit menu:

1.Use the direction key       to select drum kit.41 sets of drum kits in all.

29 sets of preset drum kits:KIT01---29

12 sets of user drum kits: USER01---12

2.Pressing the Pad Select buttons allows you to preview the

current kit (fixed tempo).

        KIT01  POP01

SONG01              DRUM ON

CLICK=4/4          TEMPO=100

3.Hit the pads to play the current kit.

Play pads

Similar to an acoustic drum kit, the digital drum 

responds differently to various playing techniques 

and dynamics. All the pads senses the striking force. 

and some voices change tone depending on the

 striking force.

Drum pad and rim shot

The digital drum pad detects head and Side stick

 (Side stick Are different from the pad shots).

Note:
1.SNARE and TOM1-TOM3 are dual channels. 

2.RIDE: it delivers RIDE BELL sound when hit 

strongly, and RIDE CYMBAL sound when hit 

   Slightly. 

  3.SNARE delivers one sound when hit the pad 

. 

rim strongly

Cymbal bow shot and choke 

CRASH and RIDE have the bow shot 

and choke, e.g. hit the cymbal or the 

rim then hold the rim to CRASH or RIDE

 sound.