Retrig Cancel: 01-16
This setting allow you to prevent re-trigger
(
Re-trigger
Important if you are using acoustic drum triggers. Such triggers can produce altered
waveforms, which may also cause inadvertent sounding at Point A in the following figure
(Retrigger)
)
This occurs in particular at the decaying edge of the waveform. Retrigger Cancel detects
such distortion in and prevents retriggering from occurring.
While repeatedly striking the pad, raise the “Retrig Cancel”value until retriggering no longer
occurs.
NOTES:
1
.
Although setting this to a high value prevents retriggering, it then becomes
easy for sounds to be omitted whe the drums played fast (roll etc.). Set this
to the lowest value possible whie still ensuring that there is no retriggering.
2
.
You can also eliminate this problem of retriggering with the Mask Time setting.
Mask Time does not detect trigger signals if they occur
within the specified
amount of time after the previous trigger signal was received. Retrigger
Cancel detects the attenuation of the trigger signal level, and triggers the
sound after internally determining which trigger signals were actually
generated when
the head was struck, while weeding out the other false
trigger signals that need not trigger a sound.
15
SAVE PAD TRIGGER SETTING
After all PAD TRIGGER parameter has been set, you can save your setting.
Press SAVE to save setting
SAVE CURRENT
TRIGGER SETTING
PRESS SAVE FOR YES
PRESS CANCEL FOR NO
Summary of Contents for JED700M
Page 1: ...Module SKD203 OWNER S GUIDE JustIn JED700M E Drumset ...
Page 24: ...21 MIDI list BEND 99H ...
Page 25: ...22 Position On Off Sensing ...
Page 31: ...Demo Song list 28 ...
