JUWEL S.p.A.
Certified EN ISO 9001:2000 - Via I° Maggio 3/E - 20010 - Vanzago (MI) Italy
Tel +39 02/9347441 Fax +39 02/93570804 P.IVA 00692460421
Prohibited partial reproduction also | © Juwel 2009
BLOCKING ELECTRONIC SYSTEM MODEL (Key + Keyboard)
THE ELECTRONIC COMBINATION-LOCK BLOCKS THE OPENING BY KEY.
A) HOW TO OPEN
1 - Press (C), digit the Opening Code (initially 0000) and press (E). If after having pressed (C),
ERROR lights up (see Manipulation Warning in General Notes), you can proceed all the same.
2 - Wait until OK lights up, then open by key.
B) HOW TO CLOSE
Close by the key, take it out and (if you want to block) press (E). OK lights up.
If , on the contrary, ERROR lights up, this means that the lock has not been previously closed.
C) HOW TO CHANGE THE OPENING CODE
OPEN DOOR, BOLTS WITHDRAWN OUTSIDE THE DOOR (closed lock).
1 -
2 -
Open (as per point A). OK lights up for 6 sec.
Before OK switches itself off, press (C) and HOLD PRESSED until CHANGE lights up.
3 - Digit the New Code (from 3 to 8 digits) and press (E).
4 - Once again, for confirmation press: New Code, (E). OK lights up.
5 - Before closing the door, check the new code (close and open).
RELEASE ELECTRONIC SYSTEM MODEL (Wheel + Keyboard)
THE ELECTRONIC COMBINATION-LOCK RELEASES THE MANUAL OPENING.
A) HOW TO OPEN
1 - Press (C), digit the Opening Code (initially 0000) and press (E). If after having pressed (C),
ERROR lights up (see Manipulation Warning in General Notes), you can proceed all the same.
2 - OK lights up and the wheel comes out: turn it right to open.
B) HOW TO CLOSE
Turn left completely the control wheel, press (E), and press the wheel until OK lights up. If , on the
contrary, ERROR lights up, this means that the door has not been correctly closed: repeat the
operation.
C) HOW TO CHANGE THE OPENING CODE
OPEN DOOR, BOLTS WITHDRAWN OUTSIDE THE DOOR (closed lock).
1 -
2 -
Open (as per point A). OK lights up for 6 sec.
Before OK switches itself off, press (C) and HOLD PRESSED until CHANGE lights up.
3 - Digit the New Code (from 3 to 8 digits) and press (E).
4 - Once again, for confirmation press: New Code, (E). OK lights up.
5 - Before closing the door, check the new code (close and open).
