Introduction
Thank you for choosing a JUWEL Aquarium product.
Our products represent over 40 years experience in the manufacturing of aquariums
and their acessories applying most modern production techniques bringing together
the JUWEL Aquarium system, which is both easy to use and simple to maintain.
Important:
Please read this instruction manual carefully and completely to make sure you
have received all components before setting up the aquarium.
Please observe the safety instructions and maintenance guidelines given in this
manual.
This instruction manual has been carefully prepared to provide you with accurate
and complete information. All efforts have been made to ensure that the
information given is correct. However, we cannot accept responsibility for
printing or other errors. Technical details are always approximate and are not
warranted characteristics and may be subject to change without notice.
Always unplug all immersed electrical equipment from mains before placing your
hands into the water.
Important:
The use of additional air stones or air lines is not necessary with the JUWEL
Aquariums. If an air stone is used, this should always be placed in the middle of
the aquarium. Capillary leaks resulting from the use of these items will not be
accepted as a fault with the aquarium.
Do not transport or move your aquarium while still containing water or sand.
Always take care not to damage the seals while maintaining your aquarium.
Do not use toxic substances to clean your aquarium.
Safety instructions:
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Operation with the RC circuit breaker only, max. 30mA.
The power plugs of the electrical devices must not become moist. Connect the
power plugs to the power supply at such a height that the connection cable
forms a loop which would enable the water to drip down.
2