JVA AgriRange Energizers
RSG1, SV2, SV5, SV10
7
Post or Star Picket Mounting
4.2 Connecting the Energizer to the Fence
1. The electric fence requires a dedicated ground/earth system. Drive at least three galvanized
earth stakes into the ground to a depth of at least 1.2m. Attach a wire from the green Earth
Terminal connector on the front of the energizer to the earth stakes.
2. Connect a wire from the red Fence Terminal connector on the front of the energizer to the live
wire of the fence.
4.3 Powering the Energizer
Battery Power Source
(RSG1): Attach the battery, red to positive and black to negative battery
terminals. For battery choice see specification table 3 on page 4. Turn the energizer ON at the On/
Off switch.
Solar Power Source
(RSG1) It is recommended that a solar regulator is used in conjunction with
a solar panel and a rechargeable battery. Please refer to the instructions provided with the solar
regulator for information regarding its setup. Once the solar regulator, solar panel and rechargeable
battery have been configured, connect the energizer to the rechargeable battery: red to positive
and black to negative battery terminals.
Turn the energizer on by pushing the Power button once.
The internal battery is already connected. Ensure that the battery is charged:
The RSG1 can be charged by plugging the external power supply into the mains.
The SV2, 5 and 10’s batteries can be charged by placing the energizer and solar panel facing
direct sunlight.
a) Position the Energizer’s Mounting Bracket against the post.
b) Insert the U-Bolts around the post and into the appropriate holes.
c) Slide the flat metal piece over the bolts and tighten with nuts.
Make sure the energizer is stable in its fixed position.
Star Picket Mounting
Simply slide the bracket over the star
picket.
