14
Button functions
Using the search code function
This function searches through the codes one by one, beginning from
the
fi
rst code in the list.
1.
Turn on the device manually.
2.
Switch the remote control mode that matches your device.
Press
to select the mode.
3.
Activate the search code function.
Hold
down
and
until the mode indicator blinks.
4.
Point the remote control at your device and press
.
If there is no response, try the next code by pressing
}
and
press
again. Repeat the process until your device turns
off.
5.
Press
to register the code.
The code is now set. Con
fi
rm that the mode indicator goes out.
■
If your TV’s remote control still does not work even after using the
search code function, use your device’s own remote control. The
TV’s remote control is not guaranteed to work with all models,
brands or operations.
■
Change the remote control mode
■
Turn on/off the device
■
Navigate the menus
■
Playback / Record, etc.
■
Mute
➡
Press “
”
■
Volume
➡
Press “
”
Select
OK
Select a chapter
Display menu
Back to previous
menu
Stop
Record
Play
Pause
Rewind
Forward
■
Select a surround mode
➡
Press “
”
•
Depending on your device, some functions may
not be operable with this remote control.
Display top
menu
GGT0312-002A-H-EN.indd 14
GGT0312-002A-H-EN.indd 14
6/1/09 10:04:09 AM
6/1/09 10:04:09 AM
