JVC 0703-AH-PJ-BJ Instruction Manual Download

Page: 10 / 28

June 30, 2003 6:18 pm

Page 10

— 10 —

Master Page: Right

Receiving stereo and bilingual programmes

Your recorder is equipped with a Sound-Multiplex decoder (A2)
and a Digital stereo sound decoder (NICAM) as well, making
reception of stereo and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.

●

To listen to a stereo programme, press

AUDIO

until “HIFI L

R” appears on the screen.

●

To listen to a bilingual programme, press

AUDIO

until “HIFI L

” or “HIFI

R” appears on the screen (as required).

●

To listen to the Standard (regular monaural) audio while
receiving a NICAM broadcast, press

AUDIO

until “NORM”

appears on the screen.

NOTE:

“O.S.D.” must be set to “ON” or the on-screen displays will not
appear (

墌

16)

To record stereo and bilingual programmes (A2)

●

Stereo programmes are automatically recorded in stereo on the
Hi-Fi audio track (with the normal audio track recording mixed
L and R channel sound).

●

Bilingual programmes are automatically recorded in bilingual
on the Hi-Fi audio track. The main soundtrack will be recorded
on the normal audio track.

To record NICAM stereo and bilingual programmes

The NICAM audio programme is recorded on the Hi-Fi audio
track, and the standard audio programme on the normal audio
track.

NOTES:

●

If the quality of stereo sound being received is poor, the
broadcast may be received in monaural with better quality.

●

Before playing back a programme recorded in stereo, or a
bilingual programme, refer to “Soundtrack selection” (

墌

8).

S-VHS (Super VHS), S-VHS ET or VHS Recording
Mode

This VCR can record in S-VHS (Super VHS), S-VHS ET or VHS.

●

To record in S-VHS:

Set “S-VHS MODE” to “ON” (

墌

16). Then, insert a cassette

marked “S-VHS”. The S-VHS indicator lights up on the display
panel.
The S-VHS recording mode is selected.

●

To record in S-VHS ET on a VHS cassette:

Set “S-VHS ET” to “ON” (

墌

9). Then, insert a cassette marked

“VHS”. The S-VHS indicator lights up on the display panel.

●

To record in VHS:

Insert a cassette marked “VHS”.
Set “S-VHS ET” to “OFF” (

墌

9).

●

To record in VHS on a S-VHS cassette:

Insert a cassette marked “S-VHS”. The S-VHS indicator lights up
on the display panel. Then, set “S-VHS MODE” to “OFF”
(

墌

16). The S-VHS indicator goes off.

The VHS recording mode is selected.

NOTE:

When playing back a tape that has been recorded in S-VHS or
S-VHS ET, the S-VHS indicator lights up on the display panel
regardless of the “S-VHS ET” (

墌

10) or “S-VHS MODE” (

墌

16)

setting.

Up to 8 timer recording programs can be made using G-

CODE

HOW

IEW

timer programing or Express timer programing method

as far as a year in advance. Remember, the clock must be set
before you can program the timer.

NOTES:

●

If all the 8 programs have already been set, “PROGRAM FULL”
appears on the TV screen.

●

After timer recording is completed, the recorder turns off
automatically.

●

You can program the timer recording while a regular recording
is in progress; the menu screens will not be recorded.

●

In case of a power failure after programming, the recorder’s
memory backup keeps your selections (if the lithium battery is
not exhausted).

G-

CODE

HOW

IEW

System Setup

INFORMATION

G-

CODE

and S

HOW

IEW

are different trademarks used to represent

the same easy recording feature, but only the term G-

CODE

system

will be used in the instructions. If you use the S

HOW

IEW

system,

follow the same instructions listed for the G-

CODE

system.

The G-

CODE

timer programming system eliminates the need to

input channel, date, start and stop time data when setting the
timer record function. Simply key in the G-

CODE

number for the

TV programme you wish to record (found in most TV listings) and
the recorder's timer is automatically programmed.

You have to set “GUIDE PROG” numbers, which are assigned to
each station for purposes of G-

CODE

timer programming, for all

the stations stored in your recorder’s memory to get proper results.

Before G-

CODE

setup you must have performed the procedures of

Tuner Set and Clock Set.

IMPORTANT

Perform the following procedure after Auto Set Up and/or the
channel setting steps.
After setting the Guide Program Numbers, channel positions may
be incorrect if you stored or skipped channels. In this case, re-
perform Guide Program Number setting.

Guide Program Number Set

Access Main Menu screen, then Initial Set screen

Press

MENU

on the remote control. Press

PUSH JOG

to place

the pointer next to “INITIAL SET”, then press

PUSH JOG

Access G-

CODE

HOW

IEW

Setup screen

Press

PUSH JOG

to place the pointer next to “G-CODE/

SHOWVIEW SETUP”, then press

PUSH JOG

Input Guide Prog number

Press

PUSH JOG

or the

Number

keys

to select the Guide Program number

as shown in the TV listing, then press

PUSH JOG

Input receiving channel number

Press

PUSH JOG

or the

Number

keys

to select the number of the channel

on which the Guide Program number’s
broadcasts are received, then press

PUSH JOG

●

If the satellite broadcast is received on
your recorder's auxiliary channel (“L-1” or “F-1”), select “L-1”
or “F-1” for the channel position to which the satellite receiver is
connected.

●

Repeat steps

and

as necessary.

Return to normal screen

Press

MENU

on the remote control.

Type of broadcast being received

On-screen display

A2 Stereo
A2 Bilingual
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural

ST
BIL.
(none)
ST NICAM
BIL. NICAM
NICAM