Filename [MX1SEU_05Name.fm]
Masterpage:Left+
18
EN
INITIAL SETTINGS
Page 18
Monday, 6 December 2004 14:00
Auto Channel Set by Downloading from TV/Auto Clock
Set/Auto Guide Programme Number Set
If you have connected the unit to your TV via a 21-pin SCART
cable (
A
pg. 16), the unit will automatically perform Preset
Download instead of the Auto Set Up in step
4
on page 17. After
downloading, the unit sets the clock and Guide Programme
numbers automatically.
1
Press
D E
to select
A
T-V LINK
B
and press
ENTER
. The T-V
LINK screen will appear.
●
When T-V LINK is completed,
A
SCAN COMPLETED
B
appears
on the TV screen. After selecting
A
OK
B
,
A
PLEASE WAIT...
B
appears on the screen while
channel data is being
transferred to the VHS deck.
During this period
(approximately 80 seconds), the
VHS deck is not operable. It will
exit the T-V LINK mode once
A
PLEASE WAIT...
B
disappears
from the screen.
ATTENTION:
Preset positions on the front display panel increase from
A
PR 1
B
;
do NOT press any button on the unit or remote control until the
front display panel shows clock time,
A
PR 1
B
or
A
– –:– –
B
as
illustrated on page 19.
●
If you press any button on the unit or remote control while
downloading is in progress, it will be interrupted.
NOTES:
●
For details, refer to the instruction manual of your TV.
●
In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto Clock
Set nor Auto Guide Programme Number Set.
●
If there is a power cut, or if you press
A
or
SET UP
while
downloading or set up is in progress, it will be interrupted; be
sure to turn off the unit power once and try again from the
beginning.
●
Auto Clock Set may not function properly depending on the
reception condition.
●
On this unit, the characters available for station names (ID) are
A–Z, 0–9, –,
Z
, + and
&
(space). Some names of downloaded
stations may differ from those of your TV. (
A
pg. 85)
Preset Download
ATTENTION:
You can use this function only with a TV offering T-V Link, etc.*
Be sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.
we
ENTER
CABLE/SAT
DVD
TV
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
●
Perform steps
1
to
3
of
A
Auto Set Up
B
(
A
pg. 17) before
continuing.
After
A
Preset Download
B
is completed, perform
A
Monitor Set
B
on
page 21.
ENTER
SELECT
SET UP
EXIT
INITIAL SET UP > AUTO CH SET
AUTO SET
T-V LINK
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
ENTER
SELECT
SET UP
EXIT
INITIAL SET UP > T-V LINK
T-V LINK
PLEASE WAIT...
CANCEL
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
MX1SEU_00.book Page 18 Monday, December 6, 2004 2:01 PM
