Masterpage:Right+
EN
43
Filename [MX1SEU_08VHS Operation.fm]
BASIC OPERATIONS ON VHS DECK
Page 43Monday, 6 December 2004 14:01
Next Function Memory
The Next Function Memory
A
tells
B
the unit what to do after rewinding.
Before continuing, make sure the unit is in the Stop mode.
For Automatic Start Of Playback
Press
O
, then press
I
within 2 seconds.
Repeat Playback
Your unit can automatically play back the whole tape 100 times
repeatedly.
1
Press
I
to start playback.
2
Press and hold
I
for over 5 seconds, then release.
●
A
x
B
lights up on the front display panel.
●
After playing back a tape 100 times, the unit stops
automatically.
3
Press
o
at any time to stop Repeat Playback.
●
Pressing
I
,
O
,
N
or
W
also stops Repeat Playback.
Manual Tracking
Your unit is equipped with automatic tracking control. During
playback, you can override this and adjust the tracking manually by
pressing the
PR
buttons.
1
During playback, press
PR +/–
on the unit simultaneously to
activate manual tracking.
2
Press
PR +/–
to adjust the tracking manually.
●
To return to automatic tracking, press
PR +/–
simultaneously or
eject and insert the tape again.
NOTE:
When a new tape is inserted, the unit enters the automatic tracking
mode automatically.
Soundtrack Selection
Your unit is capable of recording three soundtracks (HI-FI L,
HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing
AUDIO
changes the soundtrack as follows:
NOTES:
●
A
HI-FI L
W
X
R
B
should normally be selected. In this mode, Hi-Fi
stereo tapes are played back in stereo, and the normal audio
track is played back automatically for tapes with only normal
audio.
●
For instructions on recording stereo and bilingual programmes,
refer to page 45.
●
A
O.S.D.
B
must be set to
A
AUTO
B
or the on-screen displays will not
appear. (
A
pg. 81)
VHS Progressive Scan
You can watch the images on VHS deck in the Progressive scan
mode via component video.
ATTENTION:
Your TV needs to be compatible with Progressive and to have
Component video input connectors.
1
Press
HDD
or
DVD
so that the HDD or DVD lamp lights up on
the unit.
2
Set
A
L-1 OUTPUT
B
to
A
COMPONENT
B
(
A
pg. 72), and the
Progressive-compatible TV to its component input mode.
3
Press
PROGRESSIVE SCAN
for 3 or more seconds.
●
The video output indicator
q
lights up on the front display
panel.
4
Press
VHS
so that the VHS lamp lights up on the unit, then
press
PROGRESSIVE SCAN
.
●
A
COMP OFF
B
is displayed on the front display panel. It will be
displayed for 5 seconds.
5
Press
PROGRESSIVE SCAN
again within 5 seconds.
●
A
COMP ON
B
is displayed on the front display panel and
q
lights up on the front display panel.
●
The VHS progressive scan image will then be outputted from
the [COMPONENT VIDEO OUT (Y/P
B
/P
R
)] connectors.
NOTES:
●
Be sure to engage the HDD or DVD deck in stop mode.
●
It is possible to watch in interlace mode through the component
video connection (
A
L-1 OUTPUT
B
set to
A
COMPONENT
B
) simply
by pressing
PROGRESSIVE SCAN
to switch to
A
COMP ON
B
.
However,
q
will not light up on the front display panel as the
image outputted is not in progressive mode.
TRACK
USE
On-Screen Display
HI-FI
L
W
X
R
For HI-FI stereo tapes
HI-FI
L
W
For main audio of Bilingual tapes
HI-FI
X
R
For sub audio of Bilingual tapes
NORM
For audio-dubbed tapes
HI-FI
NORM
For audio-dubbed tapes
MX1SEU_00.book Page 43 Monday, December 6, 2004 2:01 PM