Masterpage:Right+
EN
71
Filename [MX1SEU_12Editing.fm]
EDITING
Page 71
Monday, 6 December 2004 14:01
You can use your unit as the source player or as the recording
deck.
NOTE:
When using another recorder as the recording deck, refer to its
instruction manual.
1
Connect another recorder’s 21-pin SCART connector to the
unit’s 21-pin SCART connector as illustrated.
A
When using your unit as the source player:
^
connect its [L-1 IN/OUT] connector to the recording deck.
B
When using your unit as the recording deck:
^
connect its [L-2 IN/DECODER] connector to the source
player.
●
If another recorder is compatible with the Y/C signal: (HDD &
DVD deck only)
^
when using your unit as the source player, set
A
L-1
OUTPUT
B
to
A
SCART S-VIDEO
B
. (
A
pg. 72)
^
when using your unit as the recording deck, set
A
L-2
SELECT
B
to
A
S-VIDEO
B
. (
A
pg. 72)
2
When using this unit as the recording deck, press
VHS/HDD/
DVD SELECT
on the unit repeatedly to select the recording
deck.
3
When using this unit as the recording deck, press
PR +/–
to
select
A
L-2
B
.
For HDD/DVD deck
●
Set
A
L-2 SELECT
B
to
A
VIDEO
B
or
A
S-VIDEO
B
. (
A
pg. 72)
4
When using this unit as the recording deck, press
REC MODE
repeatedly to set the recording mode.
5
Engage the Play mode of the source player.
6
Engage the Record mode of the recording deck.
7
Stop recording on the recording deck, then stop playback on
the source player.
NOTES:
●
All necessary cables can be obtained from your dealer.
●
For Y/C signal input/output, be sure to use a 21-pin SCART cable
that is compatible with the Y/C signal.
●
When you use this unit as the source player for editing, be sure to
set
A
SUPERIMPOSE
B
or
A
O.S.D.
B
to
A
OFF
B
before starting.
(
A
pg. 80, 81) If you are using another recorder with S-Video
and Audio output connectors, connect its S-Video and Audio
output connectors to this unit’s [S-VIDEO] and [AUDIO] input
connectors on the front panel. Then, set the unit’s input mode to
A
F-1
B
in step
3
, and set
A
F-1 INPUT
B
to
A
S-VIDEO
B
. (
A
pg. 73)
Edit To Or From Another Recorder
Player
Your unit
Another recorder
Recorder
TV receiver
Player
Your unit
Another recorder
Recorder
A
When using your unit as the source player
B
When using your unit as the recording deck
TV receiver
21-pin SCART cable
(supplied)
21-pin SCART cable
(not supplied)
21-pin SCART cable
(not supplied)
21-pin SCART
cable (supplied)
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
MX1SEU_00.book Page 71 Monday, December 6, 2004 2:01 PM
