1-14 (No.YA284)
4.6
BASIC OPERATION IN SERVICE MENU
Operate the SERVICE MENU with the remote control unit.
4.6.1 SERVICE MENU ITEMS
With the SERVICE MENU, various settings (adjustments) can be made, and they are broadly classified in the following items of settings:
4.6.2 BASIC OPERATION IN SERVICE MENU
1. HOW TO ENTER SERVICE MENU
Press the [DISPLAY] key and the [PICTURE MODE] key on the remote control unit simultaneously.
The SERVICE MENU screen will be displayed. (See Fig. 1 on the next page.)
2. SELECTION OF SUB MENU SCREEN
Press one of the keys 1 to 6 on the remote control unit, and select the SUB MENU SCREEN from the SERVICE MENU. (See Fig.1 on the next page.)
SERVICE MENU
→
SUB MENU
3. METHOD OF SETTING
NOTES:
• Once the setting values are set, they are memorized automatically.
• It must not be adjusted without inputting a signal.
(1) 1. IF
[1.VCO ] : Under normal conditions, no adjustment is required.
[2.DELAY POINT ]
(2) 2. V/C, 3. AUDIO and 4. DEF
(3) 5. VSM W/B
(4) 6. STATUS
This is for display only.
(5) 7. PLUG & PLAY (ON)
This is not used for service.
4. Release of SERVICE MENU
After completing the setting, return to the SERVICE MENU by pressing the [DISPLAY] key, then again press the [DISPLAY] key to
return to the normal screen.
1. IF
For entering/adjusting the setting values (adjustment values) of the IF circuit.
2. V/C
For entering/adjusting the setting values (adjustment values) of the VIDEO circuit.
3. AUDIO
For entering/adjusting the setting values (adjustment values) of the AUDIO circuit.
4. DEF
For entering/adjusting the setting values (adjustment values) of the DEFLECTION circuit.
5. VSM W/B
For setting the values of STANDARD, SOFT, BRIGHT and COOL, NORMAL, WARM.
6. STATUS
This is not used for service.
7. PLUG & PLAY (ON) This is not used for service.
1. IF
5. VSM W/B
2. V/C
6. STATUS
3. AUDIO
7. PLUG & PLAY (ON)
4. DEF
(a) [1] key
Select
1. IF
.
(b) [1] key
Select
1. VCO
.
(c) [DISPLAY] key
When this is pressed twice, you will return to the SERVICE MENU.
(a) [1] key
Select
1. IF
.
(b) [2] key
Select
2. DELAY POINT
.
(c) MENU [
] / [
] key
Adjust the setting value.
(d) [DISPLAY] key
When this is pressed twice, you will return to the SERVICE MENU.
(a) [2] ~[4] keys
Select one from
2. V/C
,
3. AUDIO
and
4. DEF
(b) MENU [
] / [
] key
Select setting items.
(c) MENU [
] / [
] key
Adjust the setting values of the setting items.
Use the number keys on the remote control unit for setting the WHITE BALANCE.
For the setting, refer to each item concerned.
(d) [DISPLAY] key
When this is pressed, you will return to the SERVICE MENU.
(a) [5] keys
Select
5. VSM W/B
.
(b) MENU [OK] key
Select preset items.
(c) MENU [
] / [
] key
Adjust setting items.
(d) MENU [
] / [
] key
Adjust the setting values of the setting items.
(e) [DISPLAY] key
When this is pressed, you will return to the SERVICE MENU.
