14
No. 51908
AV-21L31
AV-25L31
SERVICE ADJUSTMENTS
ADJUSTMENT PREPARATION
1.
You can make the necessary adjustments for this unit with either the remote control unit or with the adjustment equipment and parts
as given below.
2.
Adjustment with the remote control unit is made on the basis of the initial setting values, however, the new setting values which set the
screen to its optimum condition may differ from the initial settings.
3. Make sure that AC power is turned on correctly.
4. Turn on the power for the set and test equipment before use, and start the adjustment procedures after waiting at least 30 minutes.
5. Unless otherwise specified, prepare the most suitable reception or input signal for adjustment.
6. Never touch any adjustment parts, which are not specified in the list for this adjustment-variable resistors, transformers, capacitors, etc.
7. Presetting before adjustment.
Unless otherwise specified in the adjustment instructions, preset the following functions with the remote control unit.
Setting item
Setting value
PICTURE MODE(VSM)
BRIGHT
VNR
OFF
BASS, TREBLE, BALANCE
CENTER
TINT,COLOR,BRIGHT,PICTURE,DETAIL
CENTER
MEASURING INSTRUMENT
1. DC voltmeter (or Digital voltmeter)
2. Oscilloscope
3. Signal generator (Pattern generator) [NTSC]
4. Remote control unit
ADJUSTMENT ITEMS
•
B1 POWER SUPPLY
•
FOCUS ADJUSTMENT
•
IF CIRCUIT ADJUSTMENTS
Adjustment of VCO (CW)
Adjustment of DELAY POINT (AGC TAKE-OVER)
•
VC (VIDEO/CHROMA) CIRCUIT ADJUSTMENTS
Adjustment of WHITE BALANCE (Low light)
Adjustment of WHITE BALANCE (High light)
Adjustment of SUB BRIGHT
Adjustment of SUB CONTRAST
Adjustment of SUB COLOR-
Ι
Adjustment of SUB COLOR-
ΙΙ
Adjustment of SUB TINT-
Ι
Adjustment of SUB TINT-
ΙΙ
•
DEFLECTION CIRCUIT ADJUSTMENTS
Adjustment of V. SLOPE
Adjustment of V. POSITION
Adjustment of V. HEIGHT
Adjustment of H. POSITION
•
User mode setting position
Adjustment of H. WIDTH
Adjustment of SIDE PIN
Adjustment of TRAPEZIUM
Adjustment of V. S-CURVE
Adjustment of CORNER
Adjustment of H. PARALLEL
Adjustment of H. BOW
Adjustment of V. HEIGHT
Adjustment of SIDE PIN
Adjustment of CORNER
Adjustment of H. POSITION
•
VSM PRESET SETTING
•
PRESET SETTING
•
AUDIO ADJUSTMENT
•
PURITY ADJUSTMENT
•
CONVERGENCE ADJUSTMENTS
Adjustment of STATIC CONVERGENCE
Adjustment of DYNAMIC CONVERGENCE
