background image

ENGLISH

   - 10 -

The selected page number is displayed at the top left corner

of the screen. The Teletext page counter searches until the

selected page number is located, so that the desired page is

displayed on the screen.
• Press “

“ button  to move the Teletext screen forward

one page at a time.

• Press “

” button  to move the Teletext screen backward

one page at a time.

To Select Index Page

• To  select  the  page  number  of  the  index  (generally  page

100), press “

“ button.

Searching for a teletext page while watching TV

• In the Teletext mode pressing “

“  button  will  switch  the

screen to the TV mode. In the TV mode enter a page num-

ber using digit keys. As you enter last digit of page number,
“

” sign will replace the page number and flash until the

entered page number is found. Then the page number will
replace “

” sign again. Now you can display this teletext

page pressing “ “ button.

To Select Double Height Text

• Press “

“ button for the top half of the information page to

be displayed in double height text.

• Press “

“ button again for the bottom half of the informa-

tion page to be displayed in double height text.

•  Press  “

“  button  once  more  for  the  full  page  of  normal

height text.

To Reveal “concealed” Information

• Pressing “

“ button once will reveal answers on a quiz or

games page.

•  Pressing  “

“  button  again  will  conceal  the  revealed  an-

swers.

To Stop Automatic Page Change

The teletext page you have selected may contain more infor-

mation than what is on the screen; the rest of the information

will be displayed after a period of time.
• Press “

“ button to stop the automatic page change.

• Press “

“ button again to allow the next page to be dis-

played.

To Select a Subcode Page

Subcode pages are subsections of long Teletext pages that

can only be displayed on the screen one section at a time.
• Select the required Teletext page.
• Press “

“ button.

• Select the required subcode page number by pressing four

digit buttons (e.g. 0001).

•  If  the  selected  subcode  page  is  not  displayed  in  a  short

time, press “ “ button. TV programme will be displayed on

the screen.

• Teletext page number will be displayed on the upper left cor-

ner of the screen when the selected page is found.

• Press “ “ button to display the selected Teletext page.

To exit Teletext

• Press “ ” button. The screen will switch to TV mode.

Fastext and Toptext

Teletext mode will be selected according to transmission au-

tomatically.
Your TV  supports  the  7  page Teletext  system.  When  the

page number of any of the 7 pages in memory is entered, the

system will not search for the requested page; instead it will

display the page automatically.
• Press “

“ button  to move the Teletext screen forward

one page at a time.

• Press “

” button  to move the Teletext screen backward

one page at a time.

For Fastext and Toptext:

The subject-heading for the information may have a particular

colour or can be in a form located in a coloured box.
• Press an appropriate 

RED, GREEN, YELLOW 

or

 BLUE

 but-

ton in order to reach the relevant page quickly.

For Toptext:

If Toptext transmission is present, colour coded buttons will

appear in status row.
If Toptext transmission is not present, status row will not ap-

pear.
In Toptext mode the “

“ or “

” commands will request

the next or previous page respectively. If Toptext transmission

is  not  available,  in  case  of  operation  of  these  commands,

wraparound occurs. For example page 100 appears to be one

greater than page 199.

01-ENG&DK-ST-AK30-C1100-AV-21QS5SE-50072414.p65

21.07.2005, 16:41

10

Summary of Contents for AV-21QS5SE















Reviews: