14
AUTO SHUTOFF
You can set your TV to turn off if no
signals are received for about 15 minutes
or longer after the end of a broadcast.
1 Press MENU
T
to display the
“MENU 2” menu, then select
“AUTO SHUTOFF”.
MENU 2
AUTO SHUTOFF ON
CHILD LOCK ON
BLUE BACK ON
VIDEO-2 SET COMPONENT
SELECT BY EXIT BY
OPERATE BY -+
DISPLAY
2 Press CHANNEL –/+ or MENU
/
to select “ON”.
To cancel the AUTO SHUTOFF
function, select “
OFF
”.
• The AUTO SHUTOFF function does not
turn off the TV’s main power.
• The AUTO SHUTOFF will not work for a
VIDEO mode.
CHILD LOCK
You can disable the front control buttons
of the TV.
When this function is set to “
ON
”, the
TV can be operated using only the
remote control.
Use this function to prevent children
from operating the TV without parental
consent.
1 Press MENU
T
to display the
“MENU 2” menu, then select
“CHILD LOCK”.
MENU 2
AUTO SHUTOFF ON
CHILD LOCK ON
BLUE BACK ON
VIDEO-2 SET COMPONENT
SELECT BY EXIT BY
OPERATE BY -+
DISPLAY
2 Press CHANNEL –/+ or MENU
/
to select “ON”.
To cancel the CHILD LOCK function,
select “
OFF
”.
• The CHILD LOCK function is canceled
when you turn the power off.
BLUE BACK
If no signal is being received or the signal
is very weak, a blue screen automatically
becomes the picture background.
If you wish to continue viewing the poor
picture, you must set the BLUE BACK
function to “
OFF
”.
1 Press MENU
T
to display the
“MENU 2” menu, then select
“BLUE BACK”.
MENU 2
AUTO SHUTOFF ON
CHILD LOCK ON
BLUE BACK ON
VIDEO-2 SET COMPONENT
SELECT BY EXIT BY
OPERATE BY -+
DISPLAY
2 Press CHANNEL –/+ or MENU
/
to select “ON”.
To cancel the BLUE BACK function,
select “
OFF
”.
VIDEO-2 SET
Set the VIDEO-2 SET correctly according
to the video signal input from the external
device connected to the VIDEO-2 terminal.
If this setting is incorrect, images will not
be displayed.
1 Press MENU
T
to display the
“MENU 2” menu, then select
“VIDEO-2 SET”.
MENU 2
AUTO SHUTOFF ON
CHILD LOCK ON
BLUE BACK ON
VIDEO-2 SET COMPONENT
SELECT BY EXIT BY
OPERATE BY -+
DISPLAY
2 Set the VIDEO-2 SET according to
the video signal input from the
VIDEO-2 terminal.
If a normal video signal (composite
video signal) is input:
Press the CHANNEL
–/+
or the
MENU
/
buttons to select “
VIDEO
”.
If a component video signal
(Y/C
B
/C
R
signals) is input:
Press the CHANNEL
–/+
or the
MENU
/
buttons to select
“
COMPONENT
”.
Using the TV’s menus
GGT0016-29V331-E401
22/08/2003, 15:38pm
14
