JVC AV-25P9, Instructions Manual

####777766668

8

8

89999,,,,5555::::;;;;#### 

 555533339999,,,,

1

Choose a Programme number (PR) in
which a TV channel locked with the
Number buttons or PR LIST.

The screen changes to blue and the

 (CHANNEL

GUARD) appears. You cannot view the TV channel.

2

Press the DISPLAY button to display “ID 
NO.” (ID number input screen).

3

Press the Number buttons to enter the ID 
number.

The lock is temporarily released so you can view the TV
channel.

If you have forgotten the ID number:

Perform step 1 of “To set the CHANNEL GUARD func-
tion”. After confirming the ID number, press the TV/

VIDEO button to exit the menu.

Note:

•

Even if you reset the lock temporarily, it does not

mean that the CHANNEL GUARD function set for the

TV channel is cancelled. The next time anyone at-

tempts to view the TV channel, it will be locked

again. 

•

When you would like to cancel the CHANNEL

GUARD function, you must perform the operation

“To set the CHANNEL GUARD function” again.

•

To disable easy choosing of a Programme number

(PR) in which a locked TV channel has been regis-

tered, the Programme number (PR) has been set

that it cannot be chosen by the CHANNEL 

+

/

−

 but-

tons, CHANNEL SCAN button or the operation but-

tons at the TV.

•

To disable easy resetting of the lock, “ID NO.” (ID

number input screen) is set so that it cannot appear

unless you press the DISPLAY button.

■

■

■

■

&

&

&

&%

%

%

%    +

+

+

+&

&

&

&%

%

%

%66666666

You can set your TV to turn off if no signals are received for
about 15 minutes or longer after the end of a broadcast.

1

Press the 

 buttons to choose AUTO

SHUTOFF.

2

Press the 

 buttons to choose ON.

To cancel the AUTO SHUTOFF function:

Press the 

 buttons to choose OFF.

3

Press the OK button to complete the set-
ting.

The menu disappears.

Note:

•

The AUTO SHUTOFF function does not turn off the TV’s

main power.

•

The AUTO SHUTOFF will not work for a VIDEO mode.

■

■

■

■

*

*

*

*$$$$%

%

%

%22227777    $$$$

(

(

(

(5

5

5

5

Set the VIDEO-3 SETTING correctly according to the video
signal input from the external device connected to the VIDEO-
3 terminal. If this setting is incorrect,  images will not be dis-
played.

1

Press the 

 buttons to choose VIDEO-3

SETTING.

2

Set the VIDEO-3 SETTING according to the 
video signal input from the VIDEO-3 termi-
nal.

If normal video signal (composite video signal)
is input:

Press the 

 buttons to choose VIDEO.

If Component video signal (Y/C

B

/C

R

 signals) is

input:

Press the 

 buttons to choose COMPONENT.

3

Press the OK button to complete the set-
ting.

The menu disappears.

Note:

•

For detailed connecting methods, see “CONNECTING

THE EXTERNAL DEVICES” on page 28.