18
Remote control buttons and functions
AV-32/28R47SK / LCT1569-001A-U / ENGLISH
LS:
Set the volume for the left surround
speaker.
RS:
Set the volume for the right surround
speaker.
WOOFER:
Set the volume for the sub woofer.
DISTANCE:
Change the setting according to the
distance between the front speaker and the
listening point and the distance between
the surround speaker and the listening
point.
Choose from 0, 1.0, 3.0, and 4.5.
When the distance between the surround
speaker and the listening point is the same
as the distance between the front speaker
and the listening point, set to 0.
When the distance between the surround
speaker and the listening point is shorter
than the distance between the front
speaker and the listening point, set to 1.0,
3.0, or 4.5 depending on the difference.
Set while listening to the test tone
You can set each speaker while listening to
the test tone.
• The volume cannot be adjusted while the
menu is displayed. Adjust the volume to a
suitable level before displaying the menu.
Press the blue button while the
DOLBY PRO LOGIC II MUSIC menu or
DOLBY PRO LOGIC II MOVIE menu is
displayed
The test tone sounds form each speaker in
turn. Set the balance of each speaker while
listening to the test tone.
Stopping the test tone
Press the blue button again.
Return to TV channel instantly
You can return to a TV channel instantly.
Press the
b
button
The TV returns to the TV mode and a TV
channel appears.
Operating a JVC brand VCR or
DVD player
These buttons will operate a JVC brand VCR
or DVD player. Pressing a button that looks
the same as the device’s original remote
control button has the same effect as the
original remote control.
1 Set the VCR
P
DVD switch to the
VCR or DVD position.
VCR:
When you are using a VCR, set the switch
to the VCR position.
DVD:
When you are using a DVD player, set the
switch to the DVD position.
P
(text):
When you are viewing teletext
programmes, set the switch to the
P
(text) position.
2 Press the VCR/DVD Control Button
to control your VCR or DVD player
• If your device is not made by JVC,
these buttons will not work.
• Even if your device is made by JVC,
some of these buttons may not work,
depending on the device you are using.
• You can use the
p
buttons to choose
a TV channel the VCR will receive, or
choose the chapter the DVD player
plays back.
• Some models of DVD player use the
p
buttons for both operating the fast
forward/backward functions and for
choosing the chapter. In this case, the
253
buttons do not work.
AV-32&28R47SK_Eng.book Page 18 Thursday, February 26, 2004 2:41 PM
