background image

PICTURE menu

19

AV-32T4SA / LCT1673-001A-H/ English

FEATURES

Choose FEATURES and press the 

a

 or 

3

 

button to display the sub-menu.

„

AUTO VNR

VNR stands for “video noise reduction”.

AUTO:

This mode reduces any “noise” (interference 
or snowing) in the current picture. The 
function also adjusts the optimum sharpness 
of the picture (SHARP).

OFF:

The AUTO VNR function is cancelled. If 

you set the mode to AUTO but feel that the 
sharpness of the original picture has not been 
reproduced fully, change the mode to OFF. 

However, any noise remaining in the original 
picture may be emphasized.

MIN:

This mode reduces any noise irrespective of 
state of the picture. If you set the mode to 

AUTO but feel that the sharpness of the 
original picture has not been reproduced, 
change the mode MIN. However, any noise 

remaining in the original picture may be 
emphasized a little. And this may reduce the 
sharpness of the picture a little.

MAX:

This mode always reduces any noise as much 

as possible, irrespective of state of the 
picture. When you set the mode to AUTO but 
still notice some noise, change the mode to 

MAX. However, this may reduce the 
sharpness of the picture.

„

COLOUR SYSTEM

The colour system is chosen automatically. 

However, if the picture is not clear or no 

colour appears, choose the colour system 

manually.

1 Choose COLOUR SYSTEM. Then 

press the 

a

a

a

a

 

or

 

3

3

3

3

 button

The sub-menu of the COLOUR SYSTEM 
function appears.

2 Press the 

5

5

5

5

 buttons to choose 

the appropriate colour system. 

Then press the 

a

a

a

a

 button

PAL:

PAL system

SECAM:

SECAM system

NTSC 3.58:

NTSC 3.58 MHz system

NTSC 4.43:

NTSC 4.43 MHz system

AUTO:

This function detects a colour system 
from the input signal. You can only use 
this when you are viewing a picture from 

programme number PR 0 (AV), or an 
EXT terminal.

• The AUTO function may not function 

properly if you have poor signal quality. 

If the picture is abnormal in the AUTO 

function, choose another colour system 

manually.

• When in the Programme numbers PR 0 

(AV) to PR 99, you cannot choose NTSC 

3.58 or NTSC 4.43.

AUTO VNR

COLOUR SYSTEM

4:3 AUTO ASPECT

MIN

FEATURES

TV

OK

D1015-EN

D0016-EN

COLOUR SYSTEM

PAL

TV

OK

AV-32T4S_Eng.book  Page 19  Monday, June 21, 2004  10:40 AM

Summary of Contents for AV-32T4









































Reviews: