JVC AV-32Z10, Instructions Manual

DIGITAL SURROUND

EN
GLI
S

H

21

AV32/28Z10EU / LCT0918-001A-U / English

!

!

!

!

Other surround functions

DANCE CLUB:

This function creates a dance club atmosphere.

CONCERT HALL:

This function creates a concert hall atmosphere.

STADIUM:

This function creates a stadium atmosphere.

• The above function does not appear in the DIGITAL 

SURROUND menu when viewing a programme from the 
EXT terminal which has been set to DIGITAL-IN.

• The above function does not work properly for the Dolby 

Surround encoded programmes or mono sound 
programmes.

3D-PHONIC setting

1

Press the 

6

 buttons to choose 3D-

PHONIC. Then press the 

3

 button.

The sub-menu of the 3D-PHONIC function appears.

2

Press the 

6

 buttons to choose an item.

Then press the 

5

 buttons to change 

the setting.

TV SPEAKER:

Only set to CENTRE when the front speakers are 
connected to the TV. Otherwise set to L/C/R.

SUBWOOFER:

Set SUBWOOFER to ON when the subwoofer system 
is connected to the TV. Otherwise, set to OFF.

LEVEL:

You can control the effect level of the 3D-PHONIC 
function as you like.

VOLUME (LEFT/CENTRE/RIGHT):

You can adjust the sound level of each speaker 
individually. LEFT/RIGHT denotes left and right of the 
front speakers and CENTRE denotes the centre 
speaker.

3

Press the OK button to complete the 
setting.

The menu disappears.

Note:

• When a speaker system is not connected to the TV, set TV 

SPEAKER to L/C/R and SUBWOOFER to OFF. Otherwise 
the sound will not be emitted correctly.

• When you do not want to emit sound from the TV speakers, 

set TV SPEAKER to OFF.

DOLBY DIGITAL setting

Correctly set the items in the sub-menu of the DOLBY 
DIGITAL function, and use the test signal to control the 
volume level of the speakers so that you can listen to the 
sounds from them uniformly. Be sure to perform this 
operation before using the DOLBY DIGITAL function.

1

Press the 

6

 buttons to choose DOLBY 

DIGITAL. Then press the 

3

 button.

The sub-menu of the DOLBY DIGITAL function 
appears.

2

Press the 

6

 buttons to choose an item.

Then press the 

5

 buttons to change 

the setting.

TV SPEAKER:

Only set to CENTRE when the front speakers are 
connected to the TV. Otherwise set to L/C/R.

REAR SPEAKER:

Set to ON when the rear speaker is connected to the 
TV. Otherwise set to OFF. However, you cannot enjoy 
surround sound when it is set to OFF.

SUBWOOFER:

Set SUBWOOFER to ON when the subwoofer system 
is connected to the TV. Otherwise, set to OFF.

TEST MODE/VOLUME (LEFT/CENTRE/RIGHT/

LS/RS):

Set the volume balance of the speakers so that the 
correct surround effect can be achieved.
When the other settings have been completed, adjust in 
accordance with “Adjusting the volume balance with the 
TEST MODE” on page 22.

AV32Z10EU_Eng.book  Page 21  Monday, June 4, 2001  6:12 PM