AV-N29304
AV-N29430
(No.52129)1-15
3.4.3.3
SETTING METHOD
[1.V/C(S) ADJUSTMENT MODE]
For example, adjust the 1.V/C(S) by using the REMOTE CONTROL UNIT.
1) Press the [CHANNEL (-/+)] keys to select the one of setting item from S01 BRIGHT to S21 AGC ADJ.
2) Press the [VOLUME (-/+)] keys to change the setting value. The setting value will be stored automatically when release
the REMOTE CONTROL UNIT keys. It can adjust the items from 1.V/C(S) to 3.SOUND(A) in the same procedure.
[7.LOW LIGHT, 8.HIGH LIGHT AND 9.VCO ADJUSTMENT MODE]
Since the key operation in this mode is peculiar, please refer to the clause of the "ADJUSTMENT PROCEDURE".
[4.OTHERS AND 11.I2C BUS ADJUSTMENT MODE]
These are no requirement for adjustment. Don't change these values.
3.4.3.4
Release of SERVICE MENU
When adjustment is completed, press the [EXIT] key twice. Then return to the normal screen.
3.4.4 SERVICE MENU FLOW CHART
1.V/C(S)
RF 4 : 3 STD LOW
S01 BRIGHT
RF 4 : 3 STD LOW
D01 V FREQ
BRIGHT
2.DEF(D)
7.LOW LIGHT
8.HIGH LIGHT
3.SOUND(A)
4.OTHERS(F)
9.VCO
11.I2C BUS
SERVICE MENU
1.V/C(S) 2.DEF(D)
3.SOUND(A) 4.OTHERS(F)
7.LOW LIGHT 8.HIGH LIGHT
9.VCO
11.I2C BUS
SELECT BY
OPERATE BY EXIT BY
TOO HIGH GOOD TOO LOW
SYNC: YES
AFC ON
FINE 0
I2C BUS ON
F01 OSD POSI
A01 IN LEVEL
***
SERVICE MENU (MAIN MENU)
EXIT
ً ً
ً
ً
ً
ً
***
***
***
***
***
***
***
Do not adjust
Do not adjust
