background image

9

ENGLISH

VIDEO

OUTPUT

S-VIDEO
OUTPUT

USB

Supplies the power exclusively for the 
optional LCD monitor (TA-AV-Z7U).

DC OUTPUT

CAUTION

Use to transfer pictures to a personal computer. 
Also, use to control this unit from a personal 
computer.
* For instructions on installation of picture-transfer 

software in your personal computer and data 
transfer procedures, refer to the separate 
"Application software instructions".

USB

Use to attach the optional LCD monitor (TA-
AV-Z7U) to this holder. For installation 
procedure, refer to the LCD monitor's 
instruction manual.

Connect TA-AV-Z7U only. Connecting 
other apparatus may cause 
malfunctioning.

LCD monitor installation holder

S-VIDEO OUTPUT

Outputs a camera picture with Y/C signals.

VIDEO OUTPUT

Outputs a camera picture with composite signals.
Outputs the same picture as the one output by S-
VIDEO OUTPUT.

• Input signals at EXT INPUT connector cannot be 

used for the output at these connectors.

S-VIDEO OUTPUT, VIDEO OUTPUT

Plug the connector of the provided power cord into
 this inlet.
 Use a 220 V to 240 V AC power supply.

AC IN

CAUTION

• Only use the provided power cord. If a power 

cord with insufficient electric current capacity is 
used, the cord can overheat and cause a fire.

• Be sure to use a commercial AC220 V-240 V 

power supply.

Summary of Contents for AV-P950E




















Reviews: