12
PRESENTATION (BASIC)
Printed material and 3-dimensional objects
Slide presentation
1.
Adjust the position
1
and direction
2
of the side illumina-
tion lamps so that the stage receives uniform lighting.
2.
Place an object on the white back illumination area of the
stage.
3.
Adjust the picture size with the ZOOM buttons
3
while
checking the screen.
4.
When the picture size is determined, adjust the focus with
the FOCUS buttons
1
.
2
1
2
1
1.
Adjust the position
1
and direction
2
of the side illumina-
tion lamps so that the stage receives uniform lighting.
2.
Insert the film into the slide film holder in the direction shown
6
.
3.
Adjust the size of the picture with the ZOOM OUT button
3
.
4.
When the picture size is determined, adjust the focus with
the FOCUS buttons
4
.
5.
Adjust the screen brightness with the BRIGHTNESS but-
tons
5
.
• It is recommended to turn on the side illumination lamps.
• Set the picture mode for the RGB output according to the
specifications of the connected projector or display (see
page 8).
• It is recommended to use the preview mode when you do
not want to show changes of presentation objects or pic-
ture adjustments on the main screen (RGB output) (see
page 14).
• Magnifying the slide film (vertical) until the mount section
can no longer be seen makes focusing impossible. Press
the ZOOM OUT button for adjustment.
• Do not place any other materials on the stage because
they will block the reflected light from the side illumination
lamps.
• Use regular plastic slide mounts.
IN
OUT
ON
FAR
NEAR
BRIGHTER
DARKER
BRIGHTNESS
AUTO
AUTO
A5
A4/LETTER
FOCUS
ZOOM PRESET
ZOOM
OFF
AUTO WHITE
SET
4
3
5
Slide film
Slide film holder
Mount
6
